Cleaning the pump filter
This filter collects bits of fluff and small
objects, i.e. detached buttons that have
fallen into the container.
To clean, proceed as follows:
• Open the drum lid.
On the floor of the drum, there is
a laundry agitator
(Figure 12)
.
Unfasten this part
(Figure 13)
.
For this purpose:
• Insert a dowel (for example, a pencil
or a screwdriver) in the hole in part
.
• Press this dowel downwards and
simultaneously slide
towards the right
until it releases
.
• Remove
.
• Gently turn the drum with the open lid to
front side of the machine
(Figure 14)
.
• Remove pump filter
from its holder
(Figure 14)
.
• Remove foreign objects and fluff.
• Clean filter under running water
(Figure 15)
.
• Press filter back into its holder up to the
stop.
• Reinstall part
. Slide the laundry agitator
to the left until it engages audibly
(Figure 16)
.
Cleaning the filter
(depending upon model)
A
Figure 12
Figure 13
➀
➁
Figure 14
B
Figure 15
To Next Page
Loading...
