Touch the “Start/Pause” button during the working
cycle, LCD display shows “ ”and “ ”(pause),
if “ ” flashes at this moment means the door can
be opened after one minute later, when the “ ”
and “ ” appear, open the door, add/remove
the laundry. Close the door.
ii
During washing/drying
Changing the
programme
If you have accidentally selected the wrong programme:
Turn the programme selector to “ off ”.
If the childproof lock is active, temporarily deactivate,
see page 27.
Touch the “Start/Pause” button.
The “Start/Pause” indicator light comes on and
the new programme starts.
Turn the programme selector to the desired pro-
gramme. The “Start/Pause” indicator light flashes.
Cancelling the
programme
If you wish to prematurely end a programme:
If the childproof lock is active, temporarily
deactivate, see page 27.
Turn the programme selector to “ off ”.
Turn the programme selector to “Drain”,
“Spin” or 15min cooling programme. Touch
the “Start/Pause” button.
Remove the laundry after spin or drain
programme finished.
Interrupting the
programme
If you want to add/remove the laundry during active
programme and the set programme sequence will
not be changed.
To continue the interrupted programme, touch
the “Start/Pause” button again. The programme
starts.
The pause function cannot be activated during
the drying cycle and water pressure detecting
period. If there is high water level or temperature
in the drum, the door open sign does not appear,
the door cannot be opened also.
29
To Next Page
Loading...
