Unloading the laundry
Turn off the water tap.
Open the loading door.
If the loading door can not be opened:
Wait for 2 minutes ( the safety function is active )
until the programme duration is on
or
there is still water in the washing machine if Rinse
hold option was selected. In the latter case, select
“Drain” or “Spin” programme.
Caution:
Remove any debris (e.g. Coins, paper clips )
from the drum and rubber seal---risk of rust
formation!
Leave the loading door open to allow the inside
the washing machine to dry out.
Unload the laundry.
31
To Next Page
Loading...
