7
Control Panel
“开始/暂停”
“Start/Pause” touch control pushbutton
For starting/pausing the wash cycle
(programme must have been selected).
Pause function cannot be used during
drying cycle.
ii
All pushbuttons implements as Touch Control pushbuttons, you can select the desired options by touching the
buttons gently. Do not touch two or more buttons in the same time except special requirments. There’s “auto-
repeat” function for display buttons (*). Keep pressing the button until the required option is displayed.
Programme selector
For switching the machine on and off and for
selecting the programme.
Can be rotated in either direction.
The programme selector is the main switch of the
washer-dryer, if it be rotated while the programme
is running, the programme is terminated.
Touch control buttons for additional
functions
(Where required to supplement the programme)
加漂洗
Extra Rinse: Additional rinse cycle.
高水位
Water plus: Greater volume of water,
improve the rinsing
performance.
免熨烫
Easy Iron: Reduce the crease of the
laundry.
Additional options can be combined before
the programme is started.
The indicator lights of the buttons come on,
if the additional options are active.
Switch off additional option: touch button
again until the indicator light goes out.
Display panel
Indicates the settings which have
been selected(e.g. Spin speed,
Washing temperature, End in Time,
Childproof lock, Maximum load, etc)
Touch control button *
Select the washing temperature.
Touch control button *
Select the spin speed or Rinse hold.
Touch control button *
Select the drying mode and drying time.
Touch control button *
Select the End in time (programmes
will end in this time).
To Next Page
Loading...
