EasyManua.ls Logo

Siemens WD 7105 - Connecting the Appliance

Siemens WD 7105
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
max.100cmmax.100cm
max.100cmmax.100cm
110cm
~
~
100cm
~
~
11
0c
m
~
~
150cm
~
~
140cm
~
~
1 0
cm
5
~
~
max.60cmmax.60cm
max.60cmmax.60cm
47
Hose and cable
lengths
Left-hand connection
Right-hand connection
Water connection
Water supply
For the water connection a standard cold-water line
with a minimum water pressure of 0.1MPa is required
(with tap full ON, at least 8 litres of water must flow
out in one minute). If the water pressure exceeds
1MPa, a pressure reducing valve must be added.
Never connect the machine to the mixer tap of
a pressureless hot-water heater.
Caution! Connections are under full water
pressure, check for leaks with tap turned fully ON.
The filters at the free end of the inlet hose and
at the back of machine should only be removed
for cleaning purposes.

Table of Contents

Related product manuals