Siemens WD 7105 - Page 37

2.
1.
WD7105
Silver WD7125, Silver WD7225
WD7105
Turn the program selector to Off .
Fold down the cover panel.
Carefully remove the pump cap.But don t fully
remove it and allow a little more residual water
flow into the suitable container.
Remove the pump cap.
Attach and close the cover plate.
Remove any loose debris/fluff from inside the
pump and clean the pump. The pump impeller
must be able to rotate. Clean any residual suds
or fluff from the thread of the pump cap and
pump housing.
Attach and tighten the pump cap.
To avoid unused detergent from flowing into the
drain during the next wash cycle:
Pour 1 litre of water into chamber II.
Select the “Drain” programme.
Silver WD7125, Silver WD7225
35