Siemens WM16XKH1ES - Resuming the Programme When the Programme Status Is Rinse Hold; Unloading the Laundry; Switching off the Appliance; Childproof Lock

en Childproof lock
40
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the programme.
– If the water level is high: Start
the centrifugado / centrifu-
gação or desaguar / escoa-
mento programme.
3. Remove the laundry.
Resuming the programme
when the programme status
is Rinse Hold
1. Set the centrifugado / centrifu-
gação or desaguar / escoamento
programme.
2. Press inicio/pausa+carga.
Unloading the laundry
Note:Please read the information in
the "Safety" →Page4 and "Prevent-
ing material damage" →Page11 sec-
tions to ensure that you use the appli-
ance safely.
1. Open the door.
2. Remove the laundry.
Switching off the appliance
1. Press .
2. Wipe the rubber gasket dry and re-
move any foreign objects.
3. Leave the door and detergent
drawer open so that residual water
can evaporate.
Childproof lock
Childproof lock
Childproof lock
Secure your appliance against being
operated unintentionally using the
controls.
Activating the childproof lock
▶
Press and hold the two ⁠3 s. but-
tons for approx. 3seconds.
a The display shows .
a The controls are locked.
a The childproof lock remains active
even after the appliance has been
switched off.