Siemens WM16XKH1ES - Deactivating the Childproof Lock; Intelligent Dosing System; Filling the Dispenser

Intelligent dosing system en
41
Deactivating the childproof
lock
Requirement:To deactivate the
childproof lock, the appliance must
be switched on.
▶
Press and hold the two ⁠3 s. but-
tons for approx. 3seconds.
So that the programme currently
running is not cancelled, the pro-
gramme selector must be set to
the initial programme.
a goes out in the display.
Intelligent dosing system
Intelligent dosing system
Intelligent dosing system
Your appliance has an intelligent dos-
ing system for liquid detergent and
fabric softener.
The optimum quantities of liquid de-
tergent and fabric softener are dis-
pensed automatically depending on
the programme and settings. The in-
telligent dosing system has been ac-
tivated at the factory for all the desig-
nated "programmes" →Page27 and
can be deactivated for each one indi-
vidually. In all other programmes, you
can manually add detergent.
→"Adding detergent and care
product", Page39
Filling the dispenser
Note
In order to use intelligent dosing, fill the
dispenser.
¡ Fill the dispenser only with suitable
"detergent and care products"
→Page36.
¡ If you change the liquid detergent
or fabric softener, empty and clean
the dispenser beforehand.
→"Cleaning the detergent drawer",
Page49
¡ If you want to use both dispensers
for liquid detergent, adjust the
"contents of the dispenser"
→Page42.
Requirement: / flashes.
1. Pull out the detergent drawer.
2. Open the dispenser lid.
3. Pour liquid detergent and fabric
softener into the relevant dis-
pensers.
→"Detergent drawer", Page21
4. Close the dispenser lid.
Note:To prevent the detergent
from drying out or drying up, do
not leave the dispenser lid open
for a long period of time.
5. Push in the detergent drawer.
6. Adjust the "basic dosage"
→Page42.