www.sigineer.com
27
2.4.11 Automatic Recovery Operation
For the M6048D and M12048D, it is designed with automatic recovery from:
⚫ Overloads
⚫ Low battery voltage cutoff.
Pls to “Program 06 Automatic Overload Restart” and “Program 21 Low Battery Cut-Off Voltage” for more
details.
2.4.12 Other Features
Conformal Coating
The entire line of M series inverters have been processed with a conformal coating on the PCB, making it
water, rust, and dust resistant.
While these units are designed to withstand corrosion from the salty air, they are not waterproof.
3 Installation
3.1 Location
Follow all the local regulations to install the inverter.
Please install the equipment in a location of Dry, Clean, Cool with good ventilation.
Working temperature: ‐10℃ to 40℃(-14℉to 104℉)
Storage temperature: ‐40℃ to 70℃(-40℉to 158℉)
Relative Humidity: 0% to 95%，non-condensing
Cooling: Forced air
Warning! Operation in an environment where water vaper condenses on the unit will invalid
warranty.
3.2 Unpacking and Inspection
Before installation, please inspect the unit. Be sure that nothing
inside the package is damaged. You should have received the
following items in the package:
⚫ Inverter x 1
⚫ User manual x 1
⚫ Communication cable x 1 set
⚫ Wi-Fi Module x 1 (Optional for M6048D and M12048D)
Mounting the Unit
Consider the following before selecting where to install:
⚫ Do not mount the inverter to flammable construction
materials. Mount to a solid surface
⚫ Install inverter at eye level in order to allow the LCD display
to be read at all times.
⚫ Refer to the environmental temperature recommendations above for optimal operation.
⚫ Vertical orientation is recommended. Don’t install the inverter upside down, overheating will occur.
⚫ Adhere to the clearance recommendations in the diagram to allow for heat dissipation and connecting /
disconnecting wiring.
To Next Page
Loading...
Need help?
General
