Sigma Metalytics VERIFIER PMV PRO Mini - Getting Started; Charging the PRO Mini; Powering ON;OFF

3
USB-C
W and
Getting Started
Charging the PRO Mini
• Plug in USB-C Cable Charging is much more rapid if the instrument is o.
Charging light will remain dimly lit while the battery is being charged,
even while instrument is o.
Powering ON/OFF
• Turn ON the PRO Mini Press the small black button on the endplate.
The white sample illumination lamp under the Sensor Bar will light,
indicating the instrument is powered on.
• Turn OFF the PRO Mini Press and hold the small black button on the
endplate for more than 1 second. The instrument will power o when the
button is released, and the illumination lamp will turn o.
USB-C Cable
for charging
or use with
a Windows
Tablet or PC.
Push gently
but rmly until
connector is
seated.
Battery charge
light
ON - Press button
Calibrate - Press briey
OFF - Press and hold for
1 second or more