115
C4 Manual Rev 7.5.2
Fail-safe System ................................................... 34
Firmware .................................................... 11, 101
COM port issues ............................................... 105
Firmware upload problems....................................... 104
Starting the C4 from PROM based firmware ........................ 105
Updating ...................................................... 24
Version number................................................. 23
GPIB ......................................................... 10, 55
Address ....................................................... 79
connector ...................................................... 22
Front panel lockout .............................................. 55
Improvements .................................................. 12
Sample command structure with examples........................... 96
GPIB port monitoring/reset .......................................... 18
GT, GTF Go to temperature.......................................... 71
Hardware problems ............................................... 101
Hold time ..................................................... 43, 72
IEEE-488 (See GPIB) ............................................... 10
Intelligent 2 probe control ........................................... 35
Interchangeability ................................................. 11
Internal error shutdown conditions.................................... 31
Keyboard ......................................................... 21
LED Indicators .................................................... 19
Line terminator ................................................... 55
Local mode .................................................... 10, 39
Local mode problems
Controller starts immediately in local mode ......................... 102
Loop Count Error .................................................. 50
Maximizing ramp speed ............................................. 45
Memory signature checking.......................................... 31
Message table .................................................... 109
Mode switch ...................................................... 20
Warning ....................................................... 20
Model Number .................................................... 23
No Probe 2 Error................................................... 50
Noise immunity .................................................. 102
Parser, fault tolerant ............................................... 17
PFS-2 Precision Fail Safe............................................ 22
PID ....................................................... 79, 80, 83
Adjusting for changing needs ..................................... 106
Discussion of PID constants and their use .......................... 105
The Differential Term ........................................... 108
The integral term .............................................. 107
The proportional term........................................... 107
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...