Sigma 1-14K - Table of Rotors and Accessories with a Different Service Life

1-14K
Appendix
Version 05/2010, Rev. 1.8 of 01/09/2011- sb 49
Translation of the original operating manual
Table of rotors and accessories with a different service life
Rotor /
bucket
Cycles Service life
("Exp.Date")
Autoclaving Suitable for centrifuge Remarks
11026 7 years 1-14, 1-14K
12082 7 years 1-14, 1-14K
12083 7 years 1-14, 1-14K
12084 7 years 1-14, 1-14K
12085 7 years 1-14, 1-14K
12092 5 years 20x 1-14, 1-14K
12093 5 years 20x 1-14, 1-14K
12094
5 years
20x
1-14, 1-14K
12096 5 years 20x 1-14, 1-14K
12101 5 years 20x 1-15, 1-15K,
1-15P, 1-15PK
12124 5 years 20x 1-15, 1-15K,
1-15P, 1-15PK
12126 5 years 20x 1-15, 1-15K,
1-15P, 1-15PK
9100 15,000 4-15C, 4K15C, 4-16, 4-16K,
6-15, 6K15, 6-16, 6-16K
without engraving,
only "spincontrol
professional"
12500 7 years 6-15, 6K15, 6-16, 6-16K
13845 20,000 8K
13850 10,000 8K
13860 35,000 8K
13864 1,000 8K without engraving
13865 1,000 8K without engraving
13866 1,000 8K without engraving
Rotors and accessories with a
different service life
If other no data concerning the service life are engraved on the rotor or accessory, rotors
and buckets must be checked by the manufacturer after 10,000 cycles. After 50,000 cycles,
rotors must be scrapped for safety reasons.
Table of rotors and accessories with a different service life