18
LENS CAP
To preserve the lens, the lens cap is attached. If you do not use the
camera, please keep the lens cap attached.
HOW TO REMOVE THE LENS CAP
Remove the lens cap as shown.
ATTACHING THE LENS CAP
Fit the lens cap keeping the SIGMA
logo horizontal.
CAUTION!!
• If you turn camera body on with the lens cap, the camera will stop
the lens from zooming. Please remove the lens cap and then turn
on once again.
• It is not possible to attach the lens cap when the lens is zoomed
out. Please turn the camera off to return the lens to its original
position and fit the lens cap.
To Next Page
Loading...
Need help?
General
