45
M
MANUAL EXPOSURE
Set both the shutter speed and aperture value according to the
indication of the exposure meter. You can change the exposure, as
you desire.
1
Set the Mode Dial to the
M
position.
(The shutter speed value is illuminated
in green. The aperture value is
illuminated in orange.)
2
Select the desired shutter speed
value by using
button.
3
Set the exposure value to ±0.0 by
using
button.
• The exposure meter can display an
exposure error of up to ± 3 stops
from the correct exposure in
1
/
3
steps. If the exposure error is more
than three stops, the exposure meter
will blink.
4
Press the shutter button “half-way” to
verify the focus and take the picture.
To Next Page
Loading...
