44
S
SHUTTER SPEED PRIORITY AE
When you set the desired shutter speed, the camera will select the
appropriate aperture value for correct exposure. You can achieve
stop action effects by selecting a fast shutter speed, or give the
feeling of motion to a moving subject by selecting a slow shutter
speed.
1
Set the Mode Dial to the
S
position.
(The shutter speed value is illuminated
in green.)
2
Select the desired shutter speed
value by using
button.
(The shutter speed value can be set
in 1/3 stop increments from 15
seconds to 1/2000 seconds.)
3
Press the shutter button “half-way” to
verify the focus and take the picture.
WARNING !!
• If the appropriate aperture value is beyond the range of the lens in
use, due to the subject being too bright or too dark, the aperture
value indicator will blink. If the subject is too bright, set the shutter
speed to a faster one, or if the subject is too dark, set the shutter
speed to a slower one, until the indicator stops blinking.
To Next Page
Loading...
Need help?
General
