39
FORMATTING THE CARD
New cards must be formatted before use. In addition, cards with
corrupt or incompatible file systems may need to be formatted
before use.
[ Camera Settings] (P. 2 6 ) → Select [Format] and format the card.
In [Format] menu, Select [Yes] by
pressing the
button and press the
button.
To cancel formatting, select [No] by using the button and press the
button.
CAUTION !!
• Formatting erases all card contents, including locked DP2S files and all
non-DP2S files.
TIP
• Cards formatted in other cameras or devices may not operate correctly
in the DP2S camera or may have reduced capacity. To store the
maximum number of DP2S files, format the card in the DP2S camera
before use.
SHUTTER BUTTON
The shutter button of the DP2S cameras
has two positions. When you press the
shutter button “halfway down”, the
camera’s autofocus systems will activate.
When pressing the button “all-the-way
down”, the shutter will release to take a
picture.
To Next Page
Loading...
Need help?
General
