Sigma PC 15.11 - Lap View

45
US/GB
4 OVERVIEW
4.5.3 LAP VIEW
The PC 15.11 can be used for lap training. The
values for the individual laps are saved in the heart
rate monitor. You can view the values in the lap view
after and during your training.
You can only activate the lap view from the training
mode. To do this, hold down the LAP button.
In lap view mode:
Use the LAP and START/STOP buttons to navigate
and scroll through the previous laps. Press the
TOGGLE (-) and TOGGLE (+) buttons to view the
heart rate and time values for each lap.
While training, the heart rate monitor briefly shows
you a summary of the last lap for each completed lap
(briefly press the LAP button). This enables you to
directly determine whether you are close to values
you are striving to achieve (pace table, target time).