47
US/GB
5 SETTING MODE
5.1 ACTIVATING THE SETTING MODE
Prerequisite: Your heart rate monitor must be in
training mode (see section 4.5 “Overview of modes
and functions”).
Hold down the TOGGLE (+) button. The display will
flash twice to indicate that the setting mode is now
active.
5.2 DISPLAY SETUP
5.3 BUTTON ASSIGNMENT IN THE SETTING MODE
1st line SET indicates that the setting mode
is active.
3rd line/ Submenu or the setting to be
4th line changed.
START/STOP
Press:
Select and confirm
LIGHT
Press:
Light on
TOGGLE
Press:
Scroll
backward
Press and
hold:
Scroll
continuously
TOGGLE
Press:
Scroll forward
Press and hold:
Scroll continuously
To Next Page
Loading...
