Sigma SL-50 - Risk Management and Personnel; Residual Risks Summary; Symbols and Personnel Qualifications

SL-50 SL-60 MIXERS
4 of 23
RESIDUAL RISKS, PROHIBITIONS, OBLIGATIONS: Summarised table.
SYMBOLS USED AND QUALIFICATIONS OF THE PERSONNEL.
The following indicates the qualifications of personnel required to operate the mixer.
The symbols placed on a chapter mean to recall the specific skill needed for the intervention described
therein. Wherever no symbols are present, the chapter applies to everyone.
Symbol Description Features
OPERATOR
Person acquainted with operating, adjusting and programming the mixer and its
protection and safety systems, who knows possible work cycles and ingredients
to be used with relative maximum admitted amounts and who has read and
understood the use and maintenance manual.
ELECTRICAL
MAINTENANCE
TECHNICIAN
Person in good health who due to qualification, job or experience is qualified to
carry out the profession of electrical maintenance technician and who has read
and understood the use and maintenance manual.
MECHANICAL
MAINTENANCE
TECHNICIAN
Person in good health who due to qualification, job or experience is qualified to
carry out the profession of mechanical maintenance technician and who has read
and understood the use and maintenance manual.
PERSON IN
CHARGE OF
HANDLING
ZIONE
Person in good health who due to qualification, job or experience is qualified to
carry out handling of loads and who has read and understood the use and
maintenance manual.
ASSISTANCE
 Requesting manual updates.
 Phone customer assistance concerning functioning, starting or faults of
machinery.
 Requesting spare parts, repairs, system overhauls, interventions on site.
 Training courses
ATTENTION.
This sign requests you to pay particular attention to the operations indicated.
Lack of compliance can cause harm to personnel or damage to the mixer.
Obligation to
disconnect mixer
before working on it.
Obligation to carry out
earthing.
ATTENTION!
 Wear the required PPE during operations.
 Clean the mixer thoroughly after use.
 Do not remove the safety devices or protective casings.
 Do not introduce any object through the protective grid with organs in movement: danger of objects being thrown.
 Before carrying out any manoeuvre beyond the protective grid, wait for the mixer to come to a complete stop.
Stability for machinery: if there is the
possibility of slipping on wet or greasy
surfaces or positioning the equipment in
unstable places (ships, planes or other),
use the appropriate attachments for
stable fixing (4 anchoring devices with
200 kg resistance, M8 screws)