C-DIAS PROCESSOR MODULE CCP 621
27.03.2020 Page 1
C-DIAS Processor Module CCP 621
The CCP 621 processor module runs the control program and
thereby represents an essential component of an automation
system. The internal DC/DC converter powers all modules on
a C-DIAS module carrier.
The CAN bus, an Ethernet interface or the USB device (Mini
USB) can be used as the online interface.
A 7-segment display and two status LEDs provide information
on the actual status of the CPU.
For program updates, the integrated USB host interface can
be used (USB stick, keyboard). With help from the exchange-
able microSD card, the entire control program can be easily
exchanged.
The CCP 621 processor module is designed to be mounted in
the control cabinet. With the integrated VARAN manager, the
processor module offers the possibility to construct a high-
performance VARAN system to operate for example, decentralized I/O modules, drive sys-
tems or communication modules.
Compatibility
Completely PC-compatible. The CCP 621 works with standard PC BIOS; no SIGMATEK-
specific BIOS is therefore needed. LASAL is provided as the operating system.
To Next Page
Loading...
Need help?
General
