To Next PageTo Next Page
Need help?Do you have a question about the Signature Hardware 925025 and is the answer not in the manual?
Recommends consulting a professional for unfamiliar installations and states liability limitations.
Advises observing local codes and inspecting the faucet for shipping damage upon receipt.
Ensures all required materials for installation are gathered beforehand.
Instructions for connecting the water supply inlet, including nut and sleeve placement.
Instructions for connecting the water supply outlet, using nut and sleeve on tubing.
Connects the trap tube to the drain outlet and secures the flange and trap components.
Ensures tight connections, opens drain and water supply, and tests for leaks.
This document outlines the installation and maintenance instructions for a Bathroom Trim Kit, SKU: 925025, manufactured by Signature Hardware. The kit is designed to provide the necessary components for a bathroom plumbing installation, focusing on the supply and trap connections.
The Bathroom Trim Kit serves as a set of components for connecting the water supply to a bathroom fixture and for installing the drain trap. It includes parts for both the inlet (supply) and outlet (drain) connections, ensuring a complete and functional plumbing setup. The kit is intended for use in residential bathroom applications, allowing for the proper flow of water to the fixture and the efficient drainage of wastewater. The instructions emphasize proper installation techniques to prevent leaks and ensure long-term reliability.
The document references several codes: 522846, 522847, 522848, 522849, 522850, which likely correspond to specific product variations or regulatory compliance standards for the trim kit components. While specific material compositions (e.g., brass, copper) are mentioned for certain parts like the brass sleeve and copper tube, detailed material specifications (e.g., grade of brass, wall thickness of copper) are not provided. Similarly, precise dimensions for components like the copper tube or the required extension of the tailpiece into the trap (1" to 2") are given, but overall kit dimensions are not specified. The kit is designed for standard plumbing connections, utilizing compression nuts and gaskets for sealing. The use of thread sealant is explicitly discouraged on compression threads, indicating a design reliant on mechanical compression for sealing.
The kit is designed for ease of installation, with clear, step-by-step instructions for both supply and trap connections. For the supply installation, the process involves placing a compression nut and brass sleeve onto the tubing, then inserting the copper tube into the valve and tightening the compression nut with an adjustable wrench. This method is used for both the inlet and outlet supply connections. The trap installation involves inserting a tube into the drain outlet, connecting it with a nut and gasket, sliding a flange to cover the drain outlet, and then assembling the trap components (trap nut, gasket, trap, tube elbow) around the tailpiece. The tailpiece may require cutting to fit, highlighting a degree of adaptability to different sink configurations. The instructions emphasize the importance of ensuring all connections are tight and testing for leaks before completing the installation. The kit is designed to be user-friendly for those with some plumbing experience, though professional consultation is recommended for unfamiliar users.
The document primarily focuses on initial installation rather than ongoing maintenance. However, the emphasis on ensuring tight connections and testing for leaks during installation serves as a preventative measure against future maintenance issues. The instructions implicitly suggest that proper installation will minimize the need for frequent maintenance. In the event of a leak, the instructions advise repairing it as needed, implying that components are designed to be accessible for repair. The recommendation to turn valves to the closed position after testing for leaks is a standard practice for plumbing systems, ensuring that the system is ready for use and preventing accidental water flow. The use of durable materials like brass and copper in the components suggests a long lifespan under normal operating conditions, reducing the likelihood of premature wear and tear. For warranty information and customer service, users are directed to signaturehardware.com/services/warranty and a customer service number (1.866.855.2284), indicating support for potential issues or replacement parts.
General| Brand | Signature Hardware |
|---|---|
| Model | 925025 |
| Category | Bathroom Fixtures |
| Language | English |
