Signature Hardware OLNEY 565541

To Next Page

1.855.715.1800

REVISED 04/18/2022

CODES: SH663034

GETTING STARTED

BEFORE YOU BEGIN

We recommend consulting a professional if you are

unfamiliar with installing plumbing �xtures. Signature

Hardware accepts no liability for any damage to the

faucet, plumbing, sink, counter top, or for personal

injury during installation.

Observe all local plumbing and building codes.

Unpack and inspect the product for shipping damage.

If any damage is found, contact our Customer

Relations team via live chat at www.signaturehard-

ware.com or by emailing support@signaturehard-

ware.com.

Ensure that you have gathered all the required

materials that are needed for the installation.

ANTES DE COMENZAR

Le recomendamos que consulte a un profesional si no

sabe cómo instalar accesorios de plomería. Signature

Hardware no asume ninguna responsabilidad con

respecto a los daños causados al inodoro, sistema de

plomería, suelo o daños personales durante

la instalación.

Cumpla con todas las normas locales de plomería y

construcción.

Desempaque e inspeccione el producto para determinar

si tiene daños por el envío. Si tiene daños, comuníquese

con nuestro equipo de Relaciones con el Cliente por chat

en directo en www.signaturehardware.com o por correo

electrónico a support@signaturehardware.com.

AVANT DE COMMENCER

Nous vous recommandons de consulter un professionnel

si vous n’avez pas d’expérience dans l’installation

d’appareils de plomberie. Signature Hardware décline

toute responsabilité en cas de dommage au robinet, à la

plomberie, à l’évier, au comptoir ou de blessure corporelle

lors de l’installation.

Respectez tous les codes locaux de plomberie et de

construction.

Déballez et inspectez le produit pour vériﬁer qu’il n’a pas

été endommagé pendant le transport. Si un dommage

est constaté, communiquez avec notre équipe des

relations avec la clientèle au www.signaturehardware.com

ou par mailsupport@signaturehardware.com.

CÓMO COMENZAR

Asegúrese de haber reunido todos los materiales

necesarios para la instalación.

PREMIERS PAS

Assurez-vous d’avoir réuni tout le matériel nécessaire

à l’installation.

ADDITIONAL QUESTIONS?

Still need help? Check out our Help Center at

www.signaturehardware.com for product and

warranty information, or contact us through live

chat or by emailing support@signaturehard-

ware.com.

¿MÁS PREGUNTAS?

Todavía necesita ayuda. Consulte nuestro Centro de

Ayuda en www.signaturehardware.com para obtener

información de productos y garantías o comuníquese

con nosotros por chat directo o enviando un correo

electrónico a support@signaturehardware.com.

D’AUTRES QUESTIONS?

Si vous avez encore besoin de l’ aide. Veuillez consult-

ez notre centre d'aide à l'adresse www.signaturehard-

ware.com pour obtenir des informations sur les

produits et la garantie ou veuillez nous contacter par

clavardage en direct ou par courriel à l'adresse

support@signaturehardware.com.

OLNEY

METAL STAND

SOPORTE DE METAL

SUPPORT MÉTALLIQUE

SKU: 565541, 565542

Main Page

Need help?

Do you have a question about the Signature Hardware OLNEY 565541 and is the answer not in the manual?

The Olney Metal Stand is a versatile support solution designed for various plumbing fixtures, offering both aesthetic appeal and robust functionality. Available under SKUs 565541 and 565542, this metal stand is suitable for both residential and commercial applications, providing a stable and stylish base for sinks or other fixtures. Its design emphasizes ease of installation and durability, making it a practical choice for those seeking a reliable and visually pleasing support structure.

Function Description:

The primary function of the Olney Metal Stand is to provide a secure and stable mounting platform for plumbing fixtures, typically sinks. It is designed to bear the weight of the fixture and its contents, ensuring long-term stability and safety. The stand's open design allows for easy access to plumbing connections, facilitating maintenance and repairs. Its minimalist aesthetic is intended to complement a wide range of interior designs, from modern to traditional, making it a flexible choice for various bathroom or kitchen settings. The stand is constructed to be wall-mounted, which enhances its stability and frees up floor space, contributing to a cleaner and more open feel in the installation area.

Important Technical Specifications:

Dimensions: The stand measures approximately 35 9/16 inches in width, 27 5/16 inches in height, and has a depth of 2 15/16 inches for the wall mounting points. These dimensions are critical for ensuring compatibility with the intended fixture and available space.
Materials: While the specific metal type is not detailed, the "Metal Stand" designation implies a robust metallic construction, likely steel or a similar alloy, chosen for its strength and durability in a moisture-prone environment.
Mounting Hardware: The stand includes a comprehensive set of hardware for installation. This includes:
- M1/4 x 1/2 Bolts: 8 pieces for securing various components.
- Allen Wrench: For tightening the bolts.
- Screws: 4 pieces for general attachment.
- Wall Anchors: 4 pieces for secure wall mounting, essential for distributing the load and preventing pull-out.
- Level Screw: For fine-tuning the stand's levelness after installation.
SKUs: 565541, 565542. These identifiers are crucial for product identification and ordering.
Weight Capacity: While not explicitly stated, the robust construction and wall-mounting design suggest a significant weight capacity, suitable for supporting standard bathroom or kitchen sinks, including those made of heavy materials like ceramic or cast iron.

Usage Features:

Professional Consultation Recommended: The manual advises consulting a professional for installation, especially if unfamiliar with plumbing fixtures. This highlights the importance of correct installation for safety and longevity.
Local Code Compliance: Users are instructed to observe all local plumbing and building codes, ensuring that the installation meets regulatory standards.
Pre-Installation Inspection: It is recommended to unpack and inspect the product for shipping damage immediately upon receipt. Any damage should be reported to customer service, ensuring that only undamaged products are installed.
Easy Assembly: The stand features a straightforward assembly process. The top rail attaches to the console assembly using provided hardware and an Allen wrench.
Wall Mounting: The installation process involves marking mounting points on the wall, drilling pilot holes, inserting wall anchors, and then securing mounting blocks to the wall. The side rails then slide into position on these mounting blocks and are secured with an Allen wrench.
Leveling Capability: The inclusion of a level screw indicates that the stand can be finely adjusted to ensure a perfectly level surface for the fixture, which is crucial for proper drainage and aesthetic alignment.
Customer Support: Signature Hardware provides multiple channels for customer support, including live chat, email (support@signaturehardware.com), and a Help Center on their website (www.signaturehardware.com). This ensures users can get assistance with product information, warranty details, or installation queries.
Multilingual Instructions: The manual provides instructions in English, Spanish (ANTES DE COMENZAR, CÓMO COMENZAR, ¿MÁS PREGUNTAS?), and French (AVANT DE COMMENCER, PREMIERS PAS, D'AUTRES QUESTIONS?), making it accessible to a broader user base.

Maintenance Features:

Durable Construction: The use of metal for the stand implies inherent durability and resistance to wear and tear, especially in a bathroom or kitchen environment where moisture is common.
Accessibility for Plumbing: The open design of the stand ensures that plumbing connections (pipes, traps, etc.) remain easily accessible after installation. This simplifies future maintenance, repairs, or upgrades to the plumbing system without requiring the removal of the stand or fixture.
Cleaning: While specific cleaning instructions are not provided in the excerpt, metal stands typically require minimal maintenance. Regular wiping with a soft, damp cloth and mild cleaner is usually sufficient to keep the surface clean and free of water spots or grime. Abrasive cleaners or harsh chemicals should generally be avoided to prevent damage to the finish.
Inspection for Looseness: Over time, it may be beneficial to periodically check the mounting screws and bolts for any looseness, especially if the fixture experiences frequent use or vibration. Re-tightening any loose fasteners can help maintain the stand's stability and prevent potential issues.
Corrosion Resistance: Depending on the specific metal and finish used, the stand is expected to have a degree of corrosion resistance, which is vital for its longevity in humid environments. Users should be mindful of any signs of rust or corrosion and address them promptly to preserve the stand's integrity and appearance.