To Next PageTo Next Page
Need help?Do you have a question about the Signode BXT2 and is the answer not in the manual?
General| Brand | Signode |
|---|---|
| Model | BXT2 |
| Category | Power Tool |
| Language | English |
Overview of the tool's control interface.
Information on battery status indicators and operating modes.
Details on setting tension, welding time, and inspecting seals.
Physical and operational characteristics of the strapping tool.
Details on battery voltage, type, charging, and capacity.
Specifications for compatible plastic strap materials.
Explanation of caution, warning, and note symbols.
Guidelines for tool and battery disposal.
Requirements for reading manual and wearing protective gear.
Warnings about power source and strap snapping/breaking.
Precautions against crushing, water use, and non-original parts.
Defines the tool's purpose and prohibited uses.
Identifies the main physical parts of the tool.
Details the function of each button and indicator.
Describes clamping, tensioning, welding, and cutting processes.
Step-by-step guide for charging the tool's battery.
Initial steps for operating the tool, including safety and strap placement.
Detailed steps for tensioning, welding, and cutting straps.
Instructions for checking seals and cleaning the tool.
How to visually inspect the strap seal for proper welding.
Understanding the LED indicators for battery status.
Guide to choosing between Semi-Auto, Fully-Auto, and Manual modes.
Procedure to set the desired strap tension.
How to enable and set the soft tension feature.
Guide to setting the optimal welding duration.
Instructions for adapting the tool for different strap widths.
Steps to change the tool's strap width compatibility.
How to enable and disable the control panel lock.
Explanation of power-saving sleep mode.
Procedure for resetting the tool to default settings.
Instructions for cleaning or replacing the tension wheel.
Steps for cleaning or replacing the tooth plate.
How to replace the cutting knife.
Guide to identifying and resolving error codes displayed by the tool.
List of commonly replaced parts.
Comprehensive catalog of all tool components with part numbers.
Diagram showing how parts are assembled.
Terms and conditions of the tool's warranty.
List of approved lubricants and adhesives for maintenance.
