D
Diane SummersAug 4, 2025
What to do if the Signode Power Tool battery is too hot?
- CCassandra WhiteAug 4, 2025
If the battery is too hot (temperature above 60°C), allow it to cool down. Alternatively, replace the battery.
To Next PageTo Next PageWhat to do if the Signode Power Tool battery is too hot?
If the battery is too hot (temperature above 60°C), allow it to cool down. Alternatively, replace the battery.
What to do if the battery is discharged on Signode Power Tool?
If the battery of your Signode Power Tool is discharged (the lowest charge limit of the battery has been reached), charge or replace it.
What to do if Signode Power Tool uses the wrong battery?
Ensure you are using the correct type of battery for your Signode Power Tool. If you are using the correct battery, try restarting the tool by removing and replacing the battery.
Instructions for charging the tool's battery and indicators.
Step-by-step guide on how to operate the strapping tool.
Procedure for inspecting the quality of the strap seal.
Guide to adjusting the strap tension force.
Instructions for selecting and setting the tool's operating modes.
Guide for identifying and resolving common tool malfunctions.
General| Brand | Signode |
|---|---|
| Model | BXT2-19 |
| Category | Power Tool |
| Language | English |
