Need help?Do you have a question about the SIKA Idroscan and is the answer not in the manual?
Lists the main capabilities and characteristics of the Ref R digital pressure indicator.
Guidance on proper gauge mounting to prevent damage, including warnings.
Steps for authorized personnel to install the instrument, including initial checks.
Process of turning the indicator on and initial display checks.
How to access and configure instrument settings like filter and resolution.
Explains the functions of the SET and ZERO keys for operation.
Adjusts filter effect for unsteady or pulsating pressures.
Configures the resolution used to display pressure.
Sets the delay before automatic power-off.
Defines time between points (t1) and cycle duration (t2).
Enables or disables temperature data logging.
Sets the communication baud rate for the RS232 interface.
Details data storage capacity and management via AnalyzerLight software.
Instructions for initiating and terminating data logging cycles.
How to navigate and view logged measurement points.
Procedure for full-scale pressure calibration, requires authorized personnel.
Details the protocol for serial communication with the manometer.
Instructions and warnings for replacing the instrument's batteries.
Guidelines for proper scrapping of the instrument.
Lists and explains common error codes displayed by the instrument.
Pinout diagram for the RS232 serial connection.
Provides the overall dimensions of the instrument in millimeters.
Detailed diagram and instructions for using double cone seals for pressures ≥1000bar.
Lists the main capabilities and characteristics of the Ref R digital pressure indicator.
Guidance on proper gauge mounting to prevent damage, including warnings.
Steps for authorized personnel to install the instrument, including initial checks.
Process of turning the indicator on and initial display checks.
How to access and configure instrument settings like filter and resolution.
Explains the functions of the SET and ZERO keys for operation.
Adjusts filter effect for unsteady or pulsating pressures.
Configures the resolution used to display pressure.
Sets the delay before automatic power-off.
Defines time between points (t1) and cycle duration (t2).
Enables or disables temperature data logging.
Sets the communication baud rate for the RS232 interface.
Details data storage capacity and management via AnalyzerLight software.
Instructions for initiating and terminating data logging cycles.
How to navigate and view logged measurement points.
Procedure for full-scale pressure calibration, requires authorized personnel.
Details the protocol for serial communication with the manometer.
Instructions and warnings for replacing the instrument's batteries.
Guidelines for proper scrapping of the instrument.
Lists and explains common error codes displayed by the instrument.
Pinout diagram for the RS232 serial connection.
Provides the overall dimensions of the instrument in millimeters.
Detailed diagram and instructions for using double cone seals for pressures ≥1000bar.
General| Brand | SIKA |
|---|---|
| Model | Idroscan |
| Category | Measuring Instruments |
| Language | English |
To Next Page
