MU_S01 MY22_EN - User Manual S01 MY22 (V006) Page 18 of 68 Copyright© SILENCE Urban Ecomobility
Change view: partial km/partial miles – average speed (AVG)
In TRIP1 or TRIP2, press INFO (hold down).
Reset partial km/miles
In TRIP1 or TRIP2, press SET (press once). The kilometres will be set to zero.
Change to Temperatures view
In TEMP, press INFO (hold down): navigate the screens TEMP BAT -> TEMP ENG -> TEMP INV -> TEMP BAT -> …
Change Time
Press SET (and hold): you will enter the time change mode.
Press SET (press once): you will switch between hours, minutes and time mode (they will start flashing).
With the hours flashing, press INFO (press once): it will increase by one unit per press. Press INFO (and hold): the hour will increase quickly.
With the minutes flashing, press INFO (press once): it will increase by one unit per press. Press INFO (and hold): the minutes will increase quickly.
With the time mode flashing, press INFO (press once): this will allow you to switch between AM/PM and 24-hour mode.
Press SET (hold down): set the time and exit the time change mode.
Change Unit System
Press SET (hold down before and during the start of the scooter): this will switch you from the metric system (ºC, km/h, km) to imperial measurements (ºF,
mph, mi), and vice versa.
Change screen brightness
In ODO, press SET (press once): you can adjust the backlight brightness of the screen with 5 levels.
To Next Page
Loading...
