MU_S01 MY22_EN - User Manual S01 MY22 (V006) Page 34 of 68 Copyright© SILENCE Urban Ecomobility
8) Suspensions
Front fork
The front suspension of the S01 consists of a conventional hydraulic telescopic fork for all
variants ❶.
In the case of the fork on the Plus variant, it is possible to adjust* the spring preload ❷.
In the rest of the variants, the front fork is not adjustable.
Rear monoshock absorber
The rear suspension consists of a lateral hydraulic monoshock absorber.
- In the case ❸ of the Basic, Standard and Connected variants, the preload can be
set* in 3 different positions. In addition, it has an air load that must be maintained
at 6 bar pressure (do not touch).
- In the case ❹ of the Plus variant, the preload can be adjusted* in a wide range of
positions. In addition, the compression can be modified in 15 different positions.
This value can be changed by the user, by means of a knob provided for this
purpose: turn clockwise to harden (H) and counterclockwise to soften (S).
*In any case, the regulation of the preload, carried out by any of these systems, must be done at a SILENCE Official Service Centre.
To Next Page
Loading...
