SILENCE S01+ - Operations and Frequency; Cleaning

MU_S01 MY22_EN - User Manual S01 MY22 (V006) Page 58 of 68 Copyright© SILENCE Urban Ecomobility
3) Operations and frequency
ZONE
WHAT TO DO
FREQUENCY
Painted parts
Clean with shine restorer.
Every month
Rubber parts
Clean with special products to protect the rubber.
Every month
Aluminium parts
Clean with protective spray to prevent rust. Remove any rust on the aluminium carefully
with steel wool and soap.
Every week
Metal parts
Use oil to clean and lubricate metal parts (in particular, the battery undercarriage, to
ensure that it correctly unfolds).
Every month
Seat
Clean with a soft sponge to remove any insects or dirt.
Every day of use
Dashboard
Clean any hardened dirt with a soft sponge.
As needed
Tyres
Make sure that the pressure is as indicated in the “Scooter specifications (structure +
motor)” section.
Every week
Lights
Clean any hardened dirt with a soft sponge.
As needed
Windshield
Clean with a soft sponge to remove any insects or dirt.
Every day of use
Suspensions
Check for leaks in both the fork and rear shock absorber.
Every month
4) Cleaning
Clean the scooter as indicated in the previous section. As with any vehicle, it is important to clean it regularly to keep it in good condition. It is the user’s
responsibility to properly protect the scooter from aggressive contaminants in the air and the effects of salt on the roads.
WARNING: Do not clean the battery with a lot of water or a high-pressure washer. Never use harsh detergents on the scooter. Try to find gentle cleaning
products for the vehicle that are environmentally friendly.
When you dry your scooter, always use a clean and smooth cloth. Dirty or rough cloths can scratch the flat, shiny surfaces, while clean and smooth ones will
reduce scratching. Never use hard cloths or sponges.