SILENCE S01+ - Page 28

MU_S01 MY22_EN - User Manual S01 MY22 (V006) Page 28 of 68 Copyright© SILENCE Urban Ecomobility
Headlight adjustment
To adjust the headlight, turn the
screw ❶ behind it, using an 8 mm
ratchet wrench or a Phillips head
screwdriver.
ADJUSTING THE LIGHT BEAM POSITION
UP
To adjust the light beam position
upwards (high and low beams), turn
the screw clockwise (if you are
looking at the scooter’s headlight).
The screw is accessed from the
opening ❷ between the headlight
and the front fender. The
adjustment screw is in a place that is
not easy to access; if you cannot
manage to adjust it yourself, please
take the scooter to your nearest
SILENCE Official Service Centre.
ADJUSTING THE LIGHT BEAM POSITION
DOWN
To adjust the light beam position
downwards (high and low beams),
turn the screw counter-clockwise (if
you are looking at the scooter’s
headlight).
2
1