MU_S01 MY22_EN - User Manual S01 MY22 (V006) Page 31 of 68 Copyright© SILENCE Urban Ecomobility
Furthermore, your scooter features a latch to prevent the battery from being removed and to increase safety.
The latch features a cylinder that locks the battery into place and is installed in front of the rear wheel, to the left, and is protected with a rubber cover:
- To activate it (and lock the battery), simply press it inwards (towards the battery).
- Insert the key in the latch and turn to release it.
IMPORTANT: Never remove or insert the battery pack when the scooter is charging or with the key in the ignition. Make sure not to unfold the handle before
pulling the pack out (unfold it after the battery has been removed from the scooter), nor insert it with the handle unfolded (fold it before inserting).
The wheels and base of the pack slide out and fold up automatically when you remove it or insert it into the scooter. Nevertheless, it is your responsibility to
do this slowly and to make sure the wheels and base come out properly, and ensure that when inserting it, it is properly anchored (check before driving).
Check that the rubber cover is always in place when driving, thus protecting the cylinder and preventing dirt from entering. Otherwise, it could become
unusable.
To Next Page
Loading...
