MU_S01 MY22_EN - User Manual S01 MY22 (V006) Page 38 of 68 Copyright© SILENCE Urban Ecomobility
P2P
The P2P “Push-To-Pass” mode is exclusive to the Plus variant and the way it operates is different from those previously explained:
This mode has been designed solely to facilitate overtaking, allowing the scooter to reach 100 km/h in certain conditions. To activate this function, the
following is required:
- Be in SPORT mode, going over 80 km/h and have the throttle grip more than 50 % open. The following requirements must also be met:
- At that moment, if everything is correct, the “+” symbol should appear on the LCD screen next to the SPORT (❶) mode light:
- Then it will be possible to activate the P2P mode, by pressing the “Mode” button. Once activated (❷), 3 “+” symbols will be displayed and a 30-
second countdown will begin, indicated by the upper left arc (normally used as a current indicator light).
- After these 30 seconds of availability (or by pressing the “Mode” button again), the P2P mode is deactivated and cannot be activated until 2
minutes have passed (to prevent you from abusing this feature, since it should only be used in very specific situations).
WARNING: When P2P mode is disabled, it goes into SPORT mode. Take into account the deceleration, as it can be relatively abrupt.
To Next Page
Loading...
