Silvercrest 375646 2104 User Manual (English)

Other manuals for Silvercrest 375646 2104

Operating Instructions55 pages

Short Manual185 pages

Questions and Answers:

J
Jeffrey MejiaAug 7, 2025
What to do if Silvercrest Scanner is not recognised by computer?
- K
  Kristina HaasAug 7, 2025
  If the Silvercrest scanner isn't being recognized by your computer after installing the software, there are a few potential causes. First, ensure the scanner is properly connected to a USB port on your computer. If it is, try connecting it to a different USB port, as the current one may be defective. Finally, try restarting your computer, as this may be necessary for the scanner to be recognized.
D
Deborah JonesAug 15, 2025
Why is the image quality poor on my Silvercrest Scanner?
- K
  Kayla AndersonAug 15, 2025
  If you're experiencing poor image quality with your Silvercrest scanner, it could be due to dust. Check for dust on the scanner's background lighting and clean it as described in the "Cleaning" section. Also, inspect the film or slide you're scanning for dust and clean it carefully.
N
noahgutierrezAug 23, 2025
How to fix blurred scanned images on Silvercrest Scanner?
- C
  Cathy ClarkeAug 23, 2025
  If the scanned images from your Silvercrest scanner appear blurred, it may be because the lens has fogged up due to temperature differences. Wait until the device adjusts to the room temperature.
R
richard45Aug 29, 2025
How to troubleshoot PWR LED 1 not lighting up on Silvercrest Scanner?
- J
  Jennifer AndersonAug 30, 2025
  If the PWR LED 1 on your Silvercrest scanner doesn't light up, it's likely that the device is not correctly connected. Ensure the device is properly connected.