English - 17
6. Technical specifi cations
Power supply 220–240V~ 50Hz
Power consumption 730–860 W
Capacity Up to 2 place settings (dia. 24cm)
Inlet water pressure 0.04–1.0 MPa (0.4–10bar)
Hot water supply Max. 70°C
Protection class I
6.1. Product data sheet
Supplier’s name or trademark: SilverCrest®
Supplier’s address: MLAP GmbH
Meitnerstr. 9
70563 Stuttgart
GERMANY
Model identifier: SGW 860 A1
Scan the QR Code shown to download the product data sheet or contact the
service department at www.mlap.info/contact to obtain a printed copy of the
product data sheet. You will also find the QR code on the energy label.
7. EU declaration of conformity
MLAP GmbH hereby declares that the product conforms to the following Eu-
ropean requirements:
• EMC Directive 2014/30/EU
• Low Voltage Directive 2014/35/EU
• Ecodesign Directive 2009/125/EC
• RoHS Directive 2011/65/EU
• Regulation (EU) 2019/2022
• Regulation (EU) 2019/2017