EasyManua.ls Logo

Silvercrest 378202 21 - Closing the Door; Adding Salt to the Appliance; Connection to Power Supply; Opening the Door

Silvercrest 378202 21
551 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English - 21
Use, e.g., a retaining bracket or hose guide with suction cup (supplied) to hang the
drain hose to ensure that the drain hose is firmly attached.
9.5. Connection to power supply
Once you have connected the dishwasher to the water supply and water outlet, con-
nect the mains plug (21) to a power socket.
The power socket must be easily accessible so you can unplug the appliance from the
mains quickly if necessary.
10. Preparations for use
10.1. Opening the door
Fig. K
Hold the recessed grip (1) and open the door by pulling it towards you. Open the
door out fully (see Fig. K).
If the door is opened during operation the wash cycle will automatically be interrupted.
10.2. Closing the door
Push the dish rack (8) fully into the appliance.
Press on the door until you hear it lock into place.
10.3. Adding salt to the appliance
Dishwasher salt (regeneration salt) is used to soften water from a water hardness of 1–2
“medium”.
It is advisable to add dishwasher salt.

Table of Contents

Related product manuals