English - 31
11.4. Opening during operation
CAUTION!
Risk of burning!
Hot water/hot steam can escape and cause burns if the
door is opened while a program is running.
Do not open the dishwasher door fully straight away
– instead wait for about 3 seconds until the spray arm
stops rotating and then open the door completely.
The door can be opened while a program is running, allowing more dishes to be load-
ed or others to be removed. This is only efficient if the program has only been running for a
short time, as otherwise the newly loaded dishes might no longer be fully cleaned.
While the program is running, press the
button (14). Wait about 3 seconds until the
spray arm stops rotating and then open the door.
Load the additional dishes and/or remove items.
Close the door again fully. Press the
button (15) again to continue the program.
The program continues after approx. 10 seconds.
11.5. Selecting a wash program
The following table shows the various wash programs and their applications.
Set an energy saving or quick program if possible, e.g. the “ECO” or “Quick” pro-
gram.
To Next Page
Loading...
