EasyManua.ls Logo

Silvercrest 90995 - Overlock Stitches; 3-Step Zig-Zag

Silvercrest 90995
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
GB / MT
Overlock stitches
Stitch Stitch width Stitch length
E, F 3~5 S1, S2
Note:
Use new needles or ball point needles or
stretch needle!
Seams, neatening, visible hems.
For fine knits, jerseys, neck edges, ribbing.
For fine knits, jerseys, neck edges, ribbing.
For fine knits, handknits, seams.
All overlock stitches are suitable for sewing
and neatening edges and visible seams in
one operation.
When neatening, the needle should just go
over the edge of the fabric.
Stretch overlock (A)
Standard overlock (B)
Double overlock stitch (C)
AB C
Sewing on lace and elastic, darning,
mending, reinforcing edges.
1. Place patch in position. The stitch length
can be shortened to produce very close
stitches.
2. When mending tears, it is advisable to use
a piece of backing fabric to reinforce. The
stitch density can be varied by adjusting
the stitch length. First sew over the centre
and then overlap on both sides.
Depending on the type of fabric and
damage, sew between 3 and 5 rows.
Stitch Stitch width Stitch length
C3~51~2
12
3-step zig-zag
Sewing basics

Table of Contents

Related product manuals