English SilverCrest DS-1020T
32
Quality
The Quality setting determines the compression ratio of the captured photo
when saved onto the memory card. The higher the compression, the more
pictures can be stored. The corresponding icon from the table will be
displayed on the LCD (see page 19 – item 8). The following settings are
available:
Icon Compression Quality
Super Fine
Very low High quality
Fine
Low Normal quality (default)
Normal
High Low quality
ISO
ISO is a unit derived from traditional photography that determines the
sensitivity of the photographic material (film). Equivalent to these values, the
sensitivity of the sensor of your camera can be set. Use a smaller value for a
lower sensitivity, or select a higher value to obtain a higher sensitivity to light.
The set value will be displayed on the LCD (see page 19 – item 12).
A higher ISO value allows it to take pictures under bad lighting
conditions. However the picture will result more grainy. A grainy
or noisy picture is the result of a technical restriction resulting in
colour distortion for single pixels or pixel groups.
The following settings are available:
Option Description
Auto Sets the ISO sensitivity automatically
100 Equivalent to ISO 100
200 Equivalent to ISO 200
To Next Page
Loading...