English SilverCrest DS-1020T
72
Startup Image
Select a startup image that appears when powering the camera on. The
following options are available:
Option Description
Off No startup image will be shown.
System Built-in start-up image of your camera
My Photo
Custom start-up image
Tap this button to open an overview of all
available pictures. If required, you can use the
and buttons to change the displayed
page. Tap on an image to select it as your
startup image.
Reset
Reset File No.
Your camera will automatically assign a unique name to your recordings.
This file name is a combination of the prefix “DSCI” followed by a sequential
four-digit number (starting at 0001).
You can select Yes from this menu to reset the sequential number back to
0001. To avoid double names, your camera will automatically create a new
folder on the memory card.
Reset
All camera parameters will be reset to their factory-default values. However,
this does not apply to the language settings, the date and the time. Also all
files stored on the memory card or the internal memory will be kept.
Select Yes to reset the settings to the factory defaults or select No to go
back to the Setup menu without applying any changes.
To Next Page
Loading...