English SilverCrest DS-1020T
52
Voice Recording
You can use your camera to record voice (dictaphone). Proceed as follows:
Power the camera on by pressing the On/Off button [1]. The device
is now in capture mode.
Tap the
button to open the Record menu.
Tap the icon for the current scene mode.
Select the Recording audio option icon
. The menu disappears and
the camera is in Audio mode. Confirm your selection by pressing the
shutter button [4].
As soon as the device is ready for audio recording, the available
recording time will appear in the upper-right corner of the display.
Press the shutter button [4] or use the
icon to start recording.
The indicator [2] will blink during recording and the recording time
will appear on the display.
Press the shutter button [4] or use the
icon again to stop
recording.
To start another recording, tap the
button.
To exit Audio mode, tap the
button and select a different
recording mode.
To Next Page
Loading...