Possible Connections
ISO: 12 V DC
ISO: loudspeaker (max. 2 pairs) (4 - 8 Ohm)
MP3 player or USB memory stick
(USB 1.1 and 2.0)
SD or MMC
Max. four amplifiers
Display
Liquid crystal screen
(8-digit alpha-numerical
dot-matrix LCD display)
Background illumination
(colour blue, 2 dimming levels)
3 Band PLL Tuner
Display: frequency band, radio stations, mono or
stereo reception, pre-sets, activated EON, AF,
TA / TP and mute function
FM-Band (FM 1, FM 2, FM 3)
Frequency band: 87.5 - 108 MHz
Channel increments: 50 kHz
Intermediate frequency: 10.7 MHz
Stereo separation: 30 dB
Noise suppression: 55 dB
Preset stations: 18
MW Band (MW)
Frequency band: 530 - 1600 KHz
Interim frequency: 450 kHz
Available sensitivity: 32 dB µV
Pre-sets: 6
LW Band (LW)
Frequency band: 144 - 290 KHz
Interim frequency: 450 KHz
Available sensitivity: 32 dB µV
Pre-set stations: 6
IR Remote Control
Rated voltage: 3 V DC
Power supply: 1 x lithium battery
type CR2025, 3 V DC
Current consumption: approx. 30 mA
Wavelength range: near infrared 0.7 - 1.4 µm
Dimensions: 85 x 6 x 52 mm (L x H x B)
L Audio Storage Media
Playback
Data formats: MP3 with ID3, WAV compatible
Media: CD, CD-R, CD-RW, SD, MMC, USB 1.1 and
2.0 (stick or plug-in connection)
Noise suppression: > 60 dB
Channel separation: > 50 dB
Frequency range: 20 Hz - 20 kHz
Display: directory, file, track, album, artist, duration
Search function: file, track, first letter are displayed
L Safety
Important Safety Instructions
The following instructions are provided for your
safety and satisfaction when operating the device.
Please note that non-compliance with the safety in-
structions may lead to a substantial risk of accident.
Explanation of the symbols and terms used:
c Warning! Danger of death!
m Caution! Risk of injury and damage to materials!
Tip! What course of action you should follow!
c Warning!
· Do not leave small children unsupervised near
the packaging material! Otherwise there is a
danger of death through suffocation!
· Do not leave small children unsupervised in the
vicinity of the device!
· Protect yourself against electric shock! Avoid
any short circuits during connection:
- to the 12 V DC power supply of the vehicle
- to the max. 2 pairs of loudspeakers with an
impedance of 4 - 8 Ohm
- to an amplifier
· Before connecting to the 12 V DC supply of a car,
obtain information on how to maintain electrical
safety from the vehicles operation manual!
· When connecting to the 12 V DC power supply
of a vehicle, ensure that there is no voltage in
the vehicle’s connection cables. Equip the con-
nection cables with fuse holders (2 x 15 A)!
Introduction / Safety
To Next Page
Loading...
