Silvercrest RC DS2 0201-A DE 3726 - Trouble-Shooting

28 GB
Setting-up operationSetting-up operation
Q
Trouble-shooting
If the remote control does
not work, please check the
following points:
Prob-
lem
The operating indi-
cator
1
on the re-
mote control device
illuminates but
there is no reaction
Rem-
edy
· Check that the current
output from the bat-
tery is adequate. If
necessary insert a
new battery.
Prob-
lem
No indicator light
1
on remote con-
trol when pressing
“ON” or “OFF”
Rem-
edy
·
Check that the battery
has been put in cor-
rectly.
· Check if the battery
has good contact, if
necessary press down.
Prob-
lem
No reaction from
consumer
Rem-
edy
· Check that the appli-
ance is switched on.
· Assign a new code to
the wireless socket
(see “Setting up the
wireless socket”).
· Check - by walking
closer to it - that the
range is correct for
the desired location.