Silvercrest SAE 5 A1 User Manual

GB
│
IE
│
NI
│
15 ■
SAE 5 A1
CAUTION
► Use the device only in dry interior rooms.
► Due to the high power consumption, the device must be charged
using a USB mains adapter. Do not charge the device from the USB
port of a PC or notebook.
► Use only the supplied USB charging cable
p to charge the integrat-
ed battery.
► Disconnect the USB charging cable p when charging is complete.
1) Ensure that the device is switched off. Hold down the On/Off button 1
for approx. 2 seconds to switch off the device.
2) Connect the USB plug on the USB charging cable p to a plugged in
USB mains adapter.
3) Remove the protective cover a on the device to get to the DC 5V
micro-USB charging socket d . To do this, pull the protective cover a
off the device and flip it downwards.
4) Connect the micro-USB plug on the USB charging cable
p
to the DC 5V micro-USB charging socket d on the device.
The charging process starts and the charging LED o lights up red.

Silvercrest SAE 5 A1 Specifications

General

Brand	Silvercrest
Model	SAE 5 A1
Category	Speaker System
Language	English