Silvercrest SAE 5 A1 - Timer Function; Timer Functionality

GB
│
IE
│
NI
│
19 ■
SAE 5 A1
Timer function
You can use the timer function to switch off the device automatically
after 30, 60 or 90 minutes.
1) Press the Timer button
3 to set the timer. The LED of the selected
timer setting lights up green.
2) Press the Timer button
3 again to move to the next timer setting
(see table below).
button 3
Timer settings
Press 1x 30 minutes
Press 2x 60 minutes
Press 3x 90 minutes
Press 4x Timer off
NOTE
► You can change the playback mode (sleep sound/playback from
microSD card) or switch the sleep light on/off without having to reset
the timer when the timer function is activated.