Silvercrest SAE 5 A1 - Selecting a Sleep Sound; Adjusting the Volume

GB
│
IE
│
NI
│
17 ■
SAE 5 A1
Selecting a sleep sound
1) Press the button 8 to select a sleep sound. The LED of the
selected sleep sound (see table below) lights up green.
2) Press the
button 8 again to switch to the next sleep sound.
Symbol Sleep sounds
White noise
Rainstorm
Lullaby
Ocean sounds
Ticking clock
Adjusting the volume
NOTE
► The volume can be increased/decreased in steps (0%, 10%, 30%,
50%, 70%, 90%, 100%).
♦ Press the
button 4 briefly to increase the volume one step at a time.
♦ Press the
button 6 briefly to decrease the volume one step at a time.