15 GB/IE/NI
Depending on the settings of your smartphone, the
internet connection and transfer of data may incur an
additional cost.
Start the ”HealthForYou” app and follow the instructions. In the settings
menu of the app select and connect to the ”SAS 89”. A randomly
generated six digit PIN code will be displayed on the fitness wrist
band.
At the same time, an entry field will appear on your smartphone where
you should enter this code. Once you are successfully connected, yo
u
can set your personal data. If you wish, you can also activate/set
up alarms, call/text notifications or a move reminder.
Charging the battery
Battery
Low
As soon as the battery status display on the fitness wristband
shows a flat battery, you must charge the battery. To charge
the battery, proceed as follows:
Insert the USB plug on your USB charging cable
2
into the
USB port of your switched-on computer.
Connect the magnetic closure of the USB charging cable
2
with your
fitness wristband as pictured. Make sure that the USB charging cable
is
properly attached. The battery will only be charged if this is the case.
You can see the current charge level in the battery status display.
Normally the battery takes about 2 hours to fully charge.
To Next Page
Loading...
