■ 14
│
GB
│
IE SAST 18 A1
Using accessories
The crevice tool 1, the precision nozzle 3 and the wet-suction nozzle 5 can
simply be pushed into the suction opening on the appliance. The attachment must
sit securely.
The small brush attachment
4 and the universal nozzle 2 can only be used in
combination with the crevice tool
1. To do this, push them onto the crevice
tool
1 so that the catch on the crevice tool 1 clicks into the hole on the small
brush attachment
4 or the universal nozzle 2.
The motorised brush attachment
6 can only be attached in a certain position.
The two contact pins on the brush attachment
6 must be pushed into the contact
socket on the underside of the suction opening.
Selecting the right accessories:
Crevice tool
The crevice tool
1 is ideal for cleaning narrow, hard-to-access areas such as
grooves in furniture or radiator ribs, etc.
Universal nozzle
The universal nozzle
2 is suitable for cleaning various surfaces. Can only be
used in combination with the crevice tool
1.
Precision nozzle
The precision nozzle
3 is particularly well suited for cleaning in tight corners
and other hard-to-reach areas.
Small brush attachment
Use the small brush attachment
4 to gently clean delicate surfaces or smaller
objects (such as computer keyboards, electrical appliances, etc.). Can only be
used in combination with the crevice tool
1.
Wet-suction nozzle
Use the wet-suction nozzle
5 to vacuum up liquids. Use only on level I (low/
water suction ) When vacuuming liquid, do not exceed the MAX marking in
the dirt container i.
Motorised brush attachment
The motorised brush attachment
6 is ideal for cleaning upholstery and carpets.
Can only be attached in a certain direction.