Can I clean Silvercrest SBB 850 C1 Bread Maker baking mould and kneading blades in the dishwasher?
No. Please rinse the baking mould and the kneading blades of your Silvercrest Bread Maker by hand.
What to do if there is a power failure during Silvercrest Bread Maker operation?
If a power failure occurs for up to 10 minutes while your Silvercrest Bread Maker is running, the appliance will continue and complete the last set program.
Why is the finished bread left inside my Silvercrest SBB 850 C1 Bread Maker moist?
The 'Keep warm function' on your Silvercrest Bread Maker keeps the bread warm and protects it from moisture for about 1 hour. If the bread stays in the bread maker longer than that, it may become moist.
What to do if Silvercrest SBB 850 C1 does not start?
If your Silvercrest Bread Maker doesn't start after pressing the Start/Stop button, consult the "Programme sequence" table to see which program section is running. Ensure the operation lamp is lit, that you've pressed the Start/Stop button correctly, and that the power plug is properly connected.
What to do if Silvercrest SBB 850 C1 Bread Maker doesn't start after pressing Start/Stop?
If your Silvercrest Bread Maker doesn't start after pressing the Start/Stop button, check the 'Programme sequence' table to see which program section is active. Ensure the operation lamp is lit, indicating the appliance is functioning. Verify that you've pressed the Start/Stop button correctly and that the power plug is properly connected to the power grid.
Why Silvercrest SBB 850 C1 dough doesn't stir even if motor runs?
If the dough in your Silvercrest Bread Maker isn't stirring even though the motor is running, check that the kneading blades and the baking mould are correctly engaged.
What to do if kneading blade is stuck in bread from Silvercrest Bread Maker?
If a kneading blade is stuck in the bread baked in Silvercrest Bread Maker, remove it using the kneading blade remover.
What to do if Silvercrest SBB 850 C1 is not stirring dough?
If the dough isn't being stirred in your Silvercrest Bread Maker even though the motor is running, check that the kneading blades and baking mould are correctly engaged.
What to do if my Silvercrest SBB 850 C1 doesn't start after pressing Start/Stop?
If your Silvercrest Bread Maker doesn't start, check if the operation lamp is on to verify the appliance is functioning. Ensure you've pressed the Start/Stop button correctly and that the power plug is properly connected to the power grid. Some baking processes, like 'Warming up' or 'Resting,' might be running. Use the 'Programme sequence' table to identify the current program section.
What to do if kneading blade is stuck in the bread in my Silvercrest Bread Maker?
If a kneading blade is stuck in the bread made by your Silvercrest Bread Maker, remove it using the kneading blade remover.
General| Model | SBB 850 C1 |
|---|---|
| Programs | 12 |
| Timer | Up to 15 hours |
| Keep-warm function | Yes |
| Display | LCD |
Crucial warnings to prevent electric shock and physical injury.
Warnings regarding fire hazards and potential damage to the appliance.
Explains error messages and initial troubleshooting steps.
Instructions for cleaning the main unit and its lid.
Care instructions for detachable parts like the mould and blades.
To Next Page