English -
. Attaching the fastening clip
The fastening clip () can be attached in two directions.
Insert the fastening clip () into the device as shown in Fig. F.
The fastening clip () must click audibly into place.
. Mounting the hands-free car kit
Hook the fastening clip () onto your vehicle’s sun visor as shown in Fig. G.
. Status operating light
The status operating light on the telephone button () shows you the following operating
states:
Signal Meaning
Operating light flashes blue quickly • Pairing mode
Operating light flashes blue • Paired
• Telephone connection is being established /
made
Operating light changes between
purple and red
Charging in progress, in ON mode (standby)
Operating light lights up red Charging in progress, in OFF mode
Operating light flashes red Flat battery
Each operation is also accompanied by an acoustic signal.
. Operating the hands-free car kit
Slide the ON/OFF switch () to the ON position to switch on the device (see Fig. H).
ON
OFF
H
The device switches to pairing mode and is ready to connect an external device via Blue-
tooth
®
. The telephone button () flashes blue quickly.
To Next Page
Loading...
