Silvercrest SBTF 10 G1 - Pairing Via Bluetooth; Intelligent Standby Mode

 - English
.. Pairing via Bluetooth
®
 Enable the Bluetooth
®
function on your external device and pair the devices. Refer to
the user manual for your audio playback device for more information. The name of the
hands-free car kit is “SBTF  G” (see Fig. I).
ON
Settings Bluetooth
Bluetooth
DEVICES
Now Discoverable
Connected
SBTF 10 G1
I
Pairing is complete once an acoustic signal sounds and the telephone button () flashes
blue.
 If you want to stop data transfer via Bluetooth
®
, switch off the Bluetooth
®
function on the
external device.
The hands-free car kit can be actively connected to two mobile phones at a
time.
When an incoming call is received, the ring tone of the respective mobile
phone is used. When a call is in progress, the call on the second mobile
phone is indicated by an acoustic signal.
 Switch off the device by sliding the ON/OFF switch () to the OFF position.
The next time the device is switched on, the hands-free car kit will automatically connect to
the last paired device(s).
.. Intelligent standby mode
If the device is not switched off manually, it will automatically switch to energy-saving
mode after a few minutes when not in use. If the device in the car detects a vibration, such
as the opening/closing of the car door, the device switches to standby mode to automati-
cally establish the connection to the paired devices.