Silvercrest SDBS 2200 A1 User Manual

8
SDBS2200A1
GB
IE
NOTES
► The steam iron station is equipped with a safety valve which regu-
lates the build-up of excess pressure in the pressure vessel during
the heating-up phase, and vents excess steam through the steam
outlets on the underside of the ironing station This means that
there may be a slight escape of steam after switching on. This is
normal behaviour and lasts just a few seconds It does not indicate
a defect in the steam iron station.
► If steam or hot water droplets escape from the Calc / Lock /
Safe screw cap during heating, switch off the appliance and let it
cool down. Turn the Calc / Lock / Safe screw cap clockwise and
tighten it. If steam or water droplets continue to leak out, switch
off the appliance and contact Customer Service.
► Under no circumstances should you try to unscrew the Calc /
Lock / Safe screw cap while the steam unit is hot and under pres-
sure. The Calc / Lock / Safe screw cap can only be unscrewed
when the appliance has cooled down.

Silvercrest SDBS 2200 A1 Specifications

General

Brand	Silvercrest
Model	SDBS 2200 A1
Category	Iron
Language	English